My Cart

Close

American Expedition Vehicles (AEV)

Wrangler JK Fan Conversion Kit - 3.8L to 3.6L - By AEV

$75.00 USD
30406031AA

AEVu2019s 3.6L Fan Conversion Harness allows for the addition of the 2012+ Jeep 3.6L cooling fan in the 2007-11 JK Wrangler, with or without a HEMI V8. Older 3.8L JK fans are starting to wear out, which gradually decreases cooling performance without the user knowing it and can cause a heavy, modified JK to easily overheat in hot weather.u00a0
u00a0
In 2012, with the addition of the 3.6L Pentastar V6 engine, the fan output was nearly doubled due to the aluminum head design which essentially has the exhaust manifold built-in and cooled with engine coolant. Surprisingly, although it has a smaller displacement, the 3.6L Pentastar V6 engine has greater cooling requirements than a 6.4L Hemi V8!u00a0
u00a0
Adding the higher output, 3.6L cooling fan to any 2007-11 JK will eliminate the risk of experiencing detrimental cooling issues. Installation consists of a simple 3-wire hook up (positive, ground and a control wire to the TIPM) and programming the TIPM with AEVu2019s JK ProCal Module (ProCal Module sold separately. AG revision level or higher is required u2013 this designated by the last two digits of the part number).u00a0

Please note: This product requires a JK ProCal Module (sold separately) with a revision level of AG or higher. The revision level is designated by the last two digits of the part number (ie: 30406007AG). 2007 and early 2008 models will require a 2009+ JK TIPM (part number 04692289AE/AF). When buying a new TIPM from the dealer, the dealer will need to configure the unit. If you purchase a used TIPM, this is typically not required.