My Cart



'09-'18 Jeep JK 6 Switch Panel W/ 2 1/6" Gauge Hole - By SPOD

$435.00 USD $499.00 USD

6 Switch with 2-1/16 Inch Diameter Empty Gauge Hole for '09-'18 Jeep Wrangler JK

This panel has an empty 2-1/16 inch diameter hole for most 2 inch inch diameter gauges. Be sure that you choose a gauge that does not have a large backspace requirement.

  • Gauge Not included in system.

  • This bezel Does Not accommodate new Genesis Adapter.

  • If using a Aeroforce Gauge, request their longer harness.

Each system includes the following:

  • All required mounting brackets and hardware.

  • System will come pre-wired ready to install.


  • Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

  • All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

  • The Source 6 Circuit power distribution system includes:

  • 12 position terminal block for accessory attachment

  • 6 Bosch style cube style relays (SPST 40 amp) (plug-in style)

  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied

  • 6 Diodes to protect sensitive accessories such as LED lights from field collapse

  • Inline 50amp manual resetting circuit breaker

  • 8 gauge power leads with crimped and soldered terminal for connection to the battery

  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.2VDC and cuts-back in at 12.8VDC

  • so there is enough juice to start your vehicle in case you left an accessory on!

  • Fuse for LVCO which can be removed to bypass the LVCO

  • Mounting bracket for Jeep Wranglers (2009-2018)